UV DTF PRINTING SERVICE
4
water bottles
1
7
travel mug
We Print - You Brand - Image 3
8
notebook 1
We Print * You Brand
Contact Us For More Info
Just Peel – Stick- Rub & Peel
Apply to almost any hard surface – No Weeding!
Contact Us For More Info
No Minimum!
  • Preferred file formats such as AI (Adobe Illustrator), PNG (Portable Network Graphics), PDF (Portable Document Format) and Tiff files. These file types are widely supported and offer excellent compatibility with our printing systems. Files should be in RGB format. Do not send artwork mirrored.  Ensure all backgrounds are removed.  If there is a back-ground, it will be printed.
  • Resolution Below 300 dpi:
    • Images below 300 dpi may result in pixelation.
    • Quality depends on a minimum resolution of 300 dpi.
    • Low resolution may cause white base issues at the image edges during printing. Higher resolutions are advised for top-quality DTF transfers.
  • Thin Lines and Small Fonts:
    • Lines under 6 pixels/ 1.50mm and small fonts may not adhere effectively.
    • Adjust line thickness or font size for best results.
  1. Use a squeegee or scraper and firmly scrape the front and back of the UV DTF print to make sure the print has adhered to the transfer film
  2. Clean your blank substrate with isopropyl alcohol
  3. Peel off white backing from the sticker UV DTF and place in position on your substrate.
  4. Position the wrap on your substrate – please ensure you position it properly as the wrap cannot be moved / removed once applied.
  5. Scrape the entire printed area and once you are confident that all the air bubbles have been removed, gently peel off the transparent transfer film.
  1. Hand wash only, do not soak or put in the dishwasher.
  2. Let the UV DTF cure for a minimum of 48 hours before using.